[Raila]

Macroair manual
.
.
Download / Read Online Macroair manual
.
.
.

.
AirStar featured in Engineered Systems, February . You have already flagged this document. Thank you, for helping us keep this platform clean. The editors will have a look at it as soon as possible. Are you sure you want to delete your template? Your file is uploaded and ready to be published. Top element. Warranty and Technical Support . Keep all body parts clear of moving part at all times. All electrical troubleshooting and repair must be done by a qualified technician and meet all applicable codes. We recommend that a building structure be capable of holding approximately twice the stated hanging weight of the fan. The maximum hanging weight for the Model 370 is 79 lbs including the weight of an additional extension. If there is any uncertainty in the strength of the building structure, a professional structural engineer should perform a thorough evaluation of the building prior to purchasing the fans. Reference page 35 for installation. Make certain that fans are positioned so that the airfoil tips are at least 3 feet away from any area where a person may be able to extend outward to reach them. The table above shows the clearance needed from the fan to obstructions such as lighting, conduit, etc. Placement chart on page 6 for allowable mounting options. Use Step 1B if you purchased a Standard Mount. Tighten the locking set screws on the mount once the extension attachment point is level. Refer to page 10 for illustration. Attached the Rapid Mount Commercial to the adapter plate using the hardware specified above. Once the pilot holes are drilled, remove the breakouts to be used for power, remote, and safety cable. Install both brackets with the recommended hardware and hand tighten so the brackets are left loose. Once the Rapid Mount Commercial and adapter plate are attached, tighten the Glulam brackets and ensure they are flush against the adapter plate. Use Step 1A if you purchased a Rapid Mount Commercial. Install both brackets with the recommended hardware and hand tighten so the brackets are left moveable. Unit Installation for Rapid Mount Commercial Attach the extension to the bottom of the mount and the motor to the bottom of the extension. DO NOT RUN THE FANS WITHOUT AIRFOILS. THE FAN IS NOT CONFIGURED TO OPERATE WITHOUT AIRFOILS ATTACHED. Unit Installation for Standard Mount Attach the extension to the bottom of the mount and the motor to the bottom of the extension. Safety Cable and Electrical Installation Install the Safety cable and insert the wires into the appropriate terminals on the controller. Shielded CAT5e cable is provided standard. Up to 400 feet of cable can be ordered and 400 feet is the maximum distance allowed. Refer to the next page for dimensions. Connect to power in compliance with local and state codes. Refer to the above illustration for the Final Results. Guy Wire Installation Install the Guy wires and Guy wire cord. Avoid any sharp edges that may contact the Guy wire. Do not wrap the Guy wires around the building structure. Once all of the Guy wires are snug and the fan unit is stable and level, tighten the jam nuts on the turnbuckles. Picture 4 THE CORD IS CUT TO A PREDETERMINED LENGTH Picture 5 FOR PROPER TENSION. DO NOT EXCESSIVELY STRETCH THE CORD. Remove the three allen bolts that secure the bottom cover and remove the bottom cover to expose the bottom of the airfoil clamps and the wiring. The bolt should seat further into the airfoil clamp. Navigation and Operation Choose one of the two methods to mount the touchpad remote and configure the fan diameter for initial operation. If there are issues or concern discovered during an inspection, please contact the service and technical support department at MacroAir for help. Products can be returned for up to 30 days from the date you purchased it. For frequently asked questions, click below. Top element. Operation Manual MacroAir Local Override Remote. FOR FURTHER MAINTENANCE INFORMATION. Wiring the Fan Control Panel Overview, cont. This control panel overview supersedes and replaces that found in your fan Operation Manual. This control panel schematic supersedes and replaces that found in your fan Operation Manual. Refer to the fan manual for information regarding the fan. START DATE OF WARRANTY COVERAGE Warranty period for X Series and AVD fans with 50,000 operating hours covers the Motor, Electrical Controls, and Remote for 50,000 hours of run time. filexlib.
.
Macroair كتيب
Macroair user manual
Macroair handbok
Macroair manual lawn
Macroair service manual

[投稿者]

投稿